|

DIY Industrial Pendant Light for Under $10

How to inexpensively repurpose a builder grade mini pendant light with industrial style.

Happy Monday, friends! I have about three projects going on at once today. I’ve hit total beast mode to knock out several things that have just been sitting and waiting on me to finish. You’ll see a couple of them later this week.
I realized it’s been a while since I posted a builder grade light re-do. If you are new to following my DIY insanity, I’ve made it my mission to personalize every builder grade basic light fixture in our house…at least the downstairs for now.
My style isn’t for everyone, and there’s absolutely nothing wrong with simple lighting. But for our home, the hubby and I wanted something with more interest, and the one I’m sharing with y’all today is definitely not your average cookie-cutter suburban light fixture. I know there are other bloggers out there who have shared their versions of industrial style lights, so it’s nothing new under the sun. But I’m stoked to have one for myself!
DIY Industrial Pendant Light: Bless'er House


I have a mixture of styles that I love- farmhouse, French country, industrial- and I try to keep them balanced and working together in our space. (Do you find yourself in that struggle too? I blame Pinterest.)

 Since I had most of the materials I needed already hanging out in our garage and four light fixtures still left to makeover in our kitchen, I decided to go for it with our bar pendant lights. And this one was super easy!
If you want to try it out for yourself, here are the materials I used:
  • Builder grade mini pendant light fixture
  • Oil rubbed bronze spray paint (affiliate)
  • Sisal rope- 3/8 inch
  • High temp hot glue gun and glue sticks
  • Metal lamp guard (affiliate)
Since I had two fixtures, the total ended up being just under $10 for each light.

 

Here’s what we were dealing with before. Nice, simple, but just not us.
DIY Industrial Pendant Light: Bless'er House
I had a can of leftover (and my favorite) Rustoleum Oil Rubbed Bronze spray paint and primer. So I taped off the electrical parts on the fixtures and sprayed two coats.

 

DIY Industrial Pendant Light: Bless'er House
Even though I planned to wrap them in rope, I went ahead and sprayed the rods too just in case any peeked through.

 

DIY Industrial Pendant Light: Bless'er House
I let the light fixtures dry for a full 24 hours before the next step.

 

DIY Industrial Pendant Light: Bless'er House
Then, using high temp hot glue, I wrapped the sisal rope tightly around the downrods of the pendant lights. It was tedious but worth it!
DIY Industrial Pendant Light: Bless'er House

Each light took about 30-40 minutes to wrap. The beginning is a little tricky to get started. Hold the rope in place for the first few wraps around the downrod, and apply about a dime size of hot glue for each wrap around.

DIY Industrial Pendant Light: Bless'er House

I held the end in place until the last bit of glue was completely cool.

DIY Industrial Pendant Light: Bless'er House

The lamp guards screwed right in place above the bulb and that was it! I used Edison bulbs to give it a more vintage look too. They give off a yellowy light that I’m okay with in person, but it doesn’t translate very well to photos. They are rustic industrial fabulosity though. 🙂

DIY Industrial Pendant Light: Bless'er House
And they remind me a lot of Restoration Hardware’s version but without the $119 price tag.

They look pretty darn smashing with our giant chalkboard and vintage gallery wall

DIY Industrial Pendant Light: Bless'er House
…and our breakfast nook’s clock wall too.

 

DIY Industrial Pendant Light: Bless'er House
Tomorrow, I’ll be sharing a knock-your-socks-off fall recipe. If you follow me on Instagram, you might have already seen a sneak peek of the epic main ingedient. 😉  I just pulled it out of the oven and oh…my..heavens.
If you liked this post, check out these other light fixture DIYs too. (Just click the image to find the project details.)
 DIY Mason Jar Vanity Light
 Rope Chandelier
Blessings,
Follow me on

 

Or find me on

Similar Posts

47 Comments

  1. Did you use a specific type of glue for your glue gun? Didi the glue hold up to the heat of the fixture? Thanks for the idea.

    1. Hi, Pete. There are glue sticks specifically for the high temperature glue guns. The glue help up for the fixture. I do not believe the heat from the light fixture would go up the part that holds the glue.

  2. Great work. I just finished making this ceiling light. It was very easy and fun for me. It is looking awesome. Thanks and keep sharing.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.