DIY Mason Jar Vanity Light
How to inexpensively transform a basic vanity bathroom light into a farmhouse style vanity light using mason jars and spray paint.
Hi y’all! Despite having some technical difficulties this week (sometimes computers get saucy and put up a fight), I’m so excited to be sharing this project with you. If you’re not a Pin-a-holic, you may not know this, but mason jar projects have run rampant. So this one is total white noise in the sea of mason jar awesomeness out there, but I’m stoked to finally have this in our house!
I am bound and determined to change up our builder grade basic materials in our home to make it more “us” and let it have some personality. This project was super duper easy and only cost me 6 bucks! Yup. Cheapo. And I did it in about 20 minutes total (Robert’s installation included)
Supplies used: (Affiliate links are provided below. For more information, see my full disclosure.)
- 2 mason jars (or however many lights your fixture has) – I chose the smaller ones, but the big ones work too.
- Oil rubbed bronze spray paint (This one is my favorite.)
- A Sharpie
- Hammer and 1 nail
- And, of course, your builder grade light fixture (This one and this one are similar to mine and you could buy it already in oil rubbed bronze if you wanted to eliminate some work.)
After detaching the builder grade shades and bulbs and my hubby took the fixture off of the wall (I’m a slave driver, I know), I gave it two coats of the oil rubbed bronze spray paint.
While I waited for the paint to dry, I went to work on the mason jars by using the flange from the fixture (it took me forever to think of what this little do-dah was called) and traced it on the center of the jar lid with the Sharpie. (Please ignore my terrible fingernails. I’m in desperate need of a mani. Mothering a toddler takes priority.)
From here, I just started nailing holes close together around the traced circle. It was easier to keep the lid on the jar.
And here it is all nailed out. No power tools needed! After this step, I painted the lid rings too.
All it took was a little pressure and this little guy popped right out of the lid.
I thought I could just punch it out with my thumb, buuuut I thought wrong. I succeeded, but I paid the price. Don’t be a hero, y’all! Use a screwdriver or something for goodness sake! It is jagged metal, after all. (FYI, all the cool kids wear Snoopy Band-Aids.)
Once the paint was dry and both jar lids were cut out, I had to overcome my hair-brained self to figure out this step. I put the cut jar lid top on first before realizing the lid ring should be the first thing to slide on, so that was crazy difficult to pull off (and my wimpy injured-thumbed self had to pull out her big girl straw and suck it up). So HERE is the order of operations. It’s not that complicated; I just had an airhead moment. Welcome to my world. 🙂
And that was it! I used an Edison bulb to give it a little extra vintage flair. Even though I’m all for saving energy, I despise the day-to-day functionality of energy efficient bulbs. It takes a while for them to warm up, so by the time they’re bright enough to light up our tiny powder room, I’m already leaving and flipping off the switch. Ridonculous. Edison bulb it is.
This little light has so much more personality now! And it’s definitely more “us” than the basic one we had before.
So that’s one more thing we can check off the list for the powder room. One of these days, I’ll have to make the other brushed nickel pieces in here match the finish of our light. And I would loooove to have this faucet in the distant future. Baby steps, Lauren, baby steps.
It’s looking pretty spectacular with my HomeGoods mirror too. 🙂
This project marks the official halfway point of personalizing our downstairs lighting. If you missed it, I already did our foyer and hallway. The kitchen and dining room are next on my radar! I’m a force to be reckoned with when it comes to our lighting lately. Must. make. them. match!
As a little teaser for next week, I wanted to do a small something to give back to you guys for checking in on me and my DIY madness. Y’all are the reason I keep this momentum going.
If you liked this post, check out these other lighting makeovers:
(Just click the image.)
(Just click the image.)
Follow me on
Or find me on
or
Did you diy the mirror in powder room?
No Rebecca, that was a Home Goods find. But easy enough to reproduce. 🙂
Love this project! What size Edison bulbs are those?
Hi! I am planning on doing this project, So found my fixture at good will and it doesn’t have the flanges on there. what size did you use? is it something I can pick up at my hardware store? I hope so! I really love the look of this!
Hi Lori! Oh no! You should be able to find them in the electrical aisle at Lowe’s.
Love this and have been trying to figure a way to do this in my guest bath! Thanks to you I can quit trying to figure it out. I know this is an older thread, but I just found it. I have one question and sorry if it has already been addressed. Being that the mason jars are closed, have you had a problem with bulbs overheating and burning out? Again, Love it. And I am going to do it!<3
Which Edison bulbs did you use for the vanity lights? I love these and want to make the pint-size lights for my bathrooms using the builder grade light fixtures I bought (builder grade is a giant leap above what is in my 1980s fixer-upper). I’ll shortly have a 5-light quart-size mason jar fixture above my sink peninsula. Thanks!